4
Method A
Step 1
Wrap the
Quick Select Strip A
around the
tool where the Cold Shrink will be installed to
determine which size attachment to use. If
the indicator line crosses multiple attachment
sizes, either size may be used provided
the tool does not exceed the maximum
permitted weight allowed for the attachment.
English
Step 2
Slide the Cold Shrink tube to the desired
attachment location making sure the inner
core is pulled through the center of the
tube. To secure, pull the inner core strip
from the inside. As the strip is removed
the Cold Shrink will collapse. Continue
until the entire strip is removed.
Method B
Step 1
Wrap the
Quick Select Strip B
around the
tool where the Cold Shrink will be installed
to determine which size attachment to
use. If the indicator line falls between two
sizes, either may be used provided the tool
does not exceed the maximum permitted
weight allowed for the attachment.
Step 2
Wrap four layers of Friction Tape (supplied
with Cold Shrink tubes) directly on top of
each other. Stretching Activates the Bond.
Step 3
Slide the Cold Shrink tube over the center
of the Friction Tape. To install, pull the inner
core strip from the inside. As the strip is
removed the Cold Shrink will collapse,
continue until the entire strip is removed.
Содержание 42107
