2
Important Notes
Cold shrink tool attachments are
suitable only for hand tools weighing
the specified weight rating or less
(see Specifications) and tool tethers
with a length of 122 cm (4 ft) or less.
This product is intended for use
by personnel who are trained
and knowledgeable regarding
working with hand tools at height
and/or near machinery.
Inspect before each use for
damage and proper function:
1. Check all hardware for abrasion,
deformity, cuts and sharp edges.
2. Check for tears, cuts, fraying, abrasion,
discoloration, burns, holes, mold,
unsplicing, pulled or broken stitches,
or other signs of wear or damage.
3. Inspect for cracks, slits,
and stress risers.
4. Do not use and always quarantine if
any of the above apply or if damaged
or not functioning correctly.
Applicable Safety Standards
Meets or exceeds:
ANSI / ISEA 121-2018
Safety Information
WARNING!
Always wear appropriate
protective equipment. Do not use this
product on or near rotating equipment.
May contain electrically
conductive materials.
Do not alter product in any way
from its original state.
English
Содержание 42107
