Guardall PX18 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 52

background image

PX Control Panel User Manual – Issue C

- 23

-

When the panel exits test mode, either manually or automatically at the end of the test time then:

1.  Any fire sensor still in alarm will give a normal alarm response.
2.  Circuits with a 24-hour response, which are still in alarm, will be temporarily bypassed.
3.  A warning will be displayed if any PA sensor is still in alarm.

Test Options

Comms Test

Code-5

If the comms test is selected then the panel will make a test call to all telephone numbers that have
been programmed for test by the installation engineer.

Engineer

Code-05

The Eng option will only be available if the system is configured for user authorised engineer access. This
option applies to both local and remote engineer access.

When the Eng option is selected the system will prompt for the engineer PIN code to be entered.

Engineer

Guardall

The engineer must log on within 2 minutes.
Press

7

to cancel the engineer log on authorisation.

Once logged on the engineer working time is limited to 8 hours.

Code

Code-06

All users on the system are identified by a user code. A user code can be a PIN code, an electronic key
or proximity token. To change user code, log on to the keypad using your current code and choose the
code option. Then follow the display prompts. All user code changes are recorded in the system event
log.

Note: If the code option is not available this means that the system has been programmed to prevent
you from changing your user code, and a new code must be allocated by the security system manager.

New Code
Enter-

The chosen code may be any unique 4, 5 or 6 digit code.

If the entered code is not available the a warning message will be displayed.

New Code
Not Available

Re-enter Code
Enter-

The new code must be re-entered before being accepted by the system

New Code
Does not Match

If the re-entered code does not match a message will be displayed and the
system will prompt again for a new code.

New Code
Not Available

If the new code is not available you must choose another new code.

If a suitable keypad is used then the user code may be changed to either an electronic key or proximity
token. If you are changing code to an electronic key then insert the key when the system prompts for a
code. If you are changing code to a proximity token then present the token when the system prompts for
a code. When using a proximity token you will not be prompted to re-enter the code.

Intelligent Security & Fire Ltd

«
...
21
22
23
24
25
...
»

Содержание PX18





















































Отзывы:

Нет отзывов

Похожие инструкции для PX18

Бренд: Rain Bird Страницы: 48

Бренд: BEIER-Electronic Страницы: 22

Бренд: Access Страницы: 12

Бренд: Calsense Страницы: 74

Бренд: Parkside Страницы: 65

Бренд: Vacon Страницы: 132

Бренд: Zeta Страницы: 44

Бренд: WAC Страницы: 5

Бренд: Linak Страницы: 33

LMT070DICFWD-NJN

Бренд: Topway Страницы: 34

Бренд: Quickie Страницы: 64

Бренд: Kamstrup Страницы: 7

Бренд: SAGEMCOM Страницы: 2

Бренд: Instant Care Страницы: 2

Soluna Remote Control

Бренд: Rollei Страницы: 8

Бренд: TSM Страницы: 2

ELEMENTAIR B-MARK I

Бренд: Xvent Страницы: 9

Бренд: FAAC Страницы: 63

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды