Guardall px, Руководство пользователя

Страница: 26 / 46

PX/QX /RX Version 4.20 User Manual – Issue B
- 26 -
Minutes Left (PX250HS Only)
Code-27
This option is only available to an ATM user. When an ATM user code and a non-zero ATM delay
period is programmed then a delay prompt will be displayed when the ATM user code is first entered.
27=Minutes left
10 Minutes left
=Ext. Time
Ext. Time
OK
2 7
01=ATM 1
02=ATM 2
0
ATM 2
Unset
2
The actual unset menu
will depend on the ATM
user authority and the
group descriptors
If the working time is less than 10 minutes, and an extension time is programmed, then the ATM user
may extend the working time. If the programmed ATM working time is more than 10 minutes then a
warning will be given when the ATM user has 10 minutes working time left and the extend time prompt
will be displayed automatically. Requests to extend the time will be logged. At the end of the working
time the ATM user will be automatically logged off and areas that were unset by the ATM user
will be automatically set. If an ATM user logs off without setting the ATM user authorised areas
will be automatically set.
Late Work
Code-28
The late working option will only be displayed if at least one set group is programmed with a schedule
and late working has not been already selected. When the late working option is selected a list of all
available set groups will be displayed. The late work time can be any time, including times after
midnight. All late working actions are logged.
28=Late Work
1=Perimeter
2=Vault
Late Work
00:00
2 8
1
Late Work
Enter HH:MM
Late Work
19:00
1 9 0 0