Guardall px Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 46

background image

PX/QX

/RX

Version 4.20 User Manual – Issue B

- 15 -

Automatic Unsetting

The system may have been programmed by the installation engineer to automatically unset all or parts
of the system according to a pre-programmed schedule. The schedule will have been programmed to
take into account the normal opening time, non-working days and holidays.

Unsetting Warnings

When  unsetting  from  a  keypad,  the  user  is  informed  on  the  display  of  any  warnings,  e.g.  circuits
isolated or on soak. The warning display will appear for approximately 4 seconds during the unsetting
procedure.  If  more  than  one  warning  exists,  the  display  will  automatically  scroll  through  the  list  of
warnings.

Workshop
Unset

02=Set
04=Test

PIR in Store
Isolated

The unset warnings are:

1. Bypassed circuit(s) (the circuit must have a 24hr response)
2. Circuit(s) on soak test has failed (a special circuit test mode set up by
the installation engineer)
3. Isolated circuit(s)
4. Line Fault (only when setting with telephone line fault is allowed)
5. Shunted circuit(s)
6. Circuit has reached the programmed multiple alarm limit
7. Battery test faults
8. 230v mains faults

Unsetting Restrictions

The selected group is programmed with a set level and a higher level set group(s) has not been unset.
If a user attempts to unset a high level set group when a lower level is set then a warning message will
be displayed.

In a PX250HS, there are several additional conditions that apply when unsetting.

1.  The keypad must be programmed by the engineer to allow unset
2.  The selected group may be programmed for dual user unset
3.  An  open/close  schedule  may  be  programmed  for  the  selected  group  and  the  time  is  after  the

programmed close time. This condition may be ignored following an alarm in one of the set group
areas if the set group is programmed with an alarm unset time. In this case, after unsetting, the
set group will automatically set after the programmed Alarm Unset period.

4. The selected group may be programmed with an Unset Delay time and set group will only unset at

the end of the programmed unset delay period. A message will be displayed during this time and
the user unset request will be logged.

5. If a group is manually set before the scheduled set time then it may be unset up to the number of

programmed Early Set minutes after the time the group was set.

6. The schedule unset option does not apply.

Met opmaak:

opsommingstekens en
nummering

«
...
13
14
15
16
17
...
»

Содержание px















































Отзывы:

Нет отзывов

Похожие инструкции для px

Бренд: Eaton Страницы: 32

Бренд: Zenith Страницы: 14

Бренд: Observint Страницы: 2

Бренд: Olympia Страницы: 5

Бренд: Lampa Страницы: 2

Бренд: Xilica Audio Design Страницы: 10

Бренд: Paradox Страницы: 72

Бренд: M-system Страницы: 3

Бренд: C&K systems Страницы: 28

Бренд: C&K systems Страницы: 2

DUAL TEC DT-900 Series

Бренд: C&K systems Страницы: 2

Бренд: C&K systems Страницы: 40

Бренд: Far Tools Страницы: 24

Бренд: FAR Страницы: 14

Бренд: Faraday Страницы: 2

Бренд: Cambridge SoundWorks Страницы: 20

CONCORD Express

Бренд: GE Interlogix Страницы: 32

Бренд: Yamaha Страницы: 67

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды