GTO GPX-SL25 Скачать руководство пользователя страница 1

Страница: 1 / 40

rev 03.21.13

Installation Manual for the

Slide Gate Operator System

PROFESSIONAL INSTALLATION RECOMMENDED!

WARNING!

This equipment is similar to other gate or door equipment and meets or

exceeds Underwriters Laboratory Standard 325 (UL 325). However, gate

equipment has hazards associated with its use and therefore by installing this

product the installer and user accept full responsibility for following and noting

the installation and safety instructions. Failure to follow installation and safety

instructions can result in hazards developing due to improper assembly. You

agree to properly install this product and that if you fail to do so Gates That

Open, LLC, (“GTO”) shall in no event be liable for direct, indirect, incidental,

special or consequential damages or loss of profits whether based in contract

tort or any other legal theory during the course of the warranty or at any time

thereafter. The installer and/or user agree to assume responsibility for all

liability and use of this product releasing Gates That Open, LLC, from any

and all liability. If you are not in agreement with this disclaimer or do not feel

capable of properly following all installation and safety instructions you may

return this product for full replacement value.
READ ALL INSTRUCTIONS CAREFULLY AND COMPLETELY before

attempting to install and use this automatic gate operator. This gate operator

produces a high level of force. Stay clear of the unit while it is operating and

exercise caution at all times.
All automatic gate operators are intended for use on vehicular gates only.

This product meets and exceeds the requirements of UL 325, the standard which

regulates gate operator safety, as established and made effective March 1, 2000,

by Underwriters Laboratories Inc.

For more information on the GTO/ACCESS SYSTEMS full line of automatic gate

operators and access controls visit our website at www.gtoaccess.com.

Printed in China for Gates That Open, LLC.

, LLC

GPX-SL25

PROFESSIONAL RESIDENTIAL

ACCESS

SYSTEMS

DO NOT

INSTALL THIS OPERATOR WITHOUT

SAFETY EDGES AND ROLLER GUARDS!

Содержание GPX-SL25









































Результаты поиска

Содержание GPX-SL25

Отзывы:

Похожие инструкции для GPX-SL25

Бренды по названию

Популярные бренды

GTO GPX-SL25, Руководство по установке

Результаты поиска

Содержание GPX-SL25

Отзывы:

Похожие инструкции для GPX-SL25

Бренды по названию

Популярные бренды