12
Removing the Operator Housing
Before you can gain access to the operator frame and its mounting holes, the housing will have to be
removed from the operator.
1.
Remove the (2) 3/8” allen bolts and (2) m8 washers from the operator housing (this hardware is
located on each side of the housing).
2.
Lift the housing off the operator and set it aside.
Allen Bolts
with 5mm key
Washers
Mounting the Operator
1.
Lift the operator and align its mounting holes over the 3/8” diameter concrete mounting anchors.
2.
Lower the operator into position and fasten it to the mounting anchors with (4) 3/8” washers and
nuts (not provided).
