GTO 2002XLS Скачать руководство пользователя

Страница: 1 / 44

WARNING!

This equipment is similar to other gate or door equipment and meets or exceeds

Underwriters Laboratory Standard 325 (UL 325). However, gate equipment has

hazards associated with its use and therefore by installing this product the installer

and user accept full responsibility for following and noting the installation and safety

instructions. Failure to follow installation and safety instructions can result in hazards

developing due to improper assembly. You agree to properly install this product and

that if you fail to do so Gates That Open, LLC, (“GTO”) shall in no event be liable for

direct, indirect, incidental, special or consequential damages or loss of profits whether

based in contract tort or any other legal theory during the course of the warranty

or at any time thereafter. The installer and/or user agree to assume responsibility

for all liability and use of this product releasing Gates That Open, LLC, from any and

all liability. If you are not in agreement with this disclaimer or do not feel capable of

properly following all installation and safety instructions you may return this product

for full replacement value.
READ ALL INSTRUCTIONS CAREFULLY AND COMPLETELY before attempting to

install and use this automatic gate operator. This gate operator produces a high level

of force. Stay clear of the unit while it is operating and exercise caution at all times.
All automatic gate operators are intended for use on

vehicular gates only.

This product meets and exceeds the requirements of UL 325, the standard which

regulates gate operator safety, as established and made effective March 1, 2000, by

Underwriters Laboratories Inc.

For more information on the GTO/ACCESS SYSTEMS full line of automatic gate

operators and access controls visit our website at www.gtoaccess.com.

Printed in China for Gates That Open, LLC.

R4728 01.12.12

, LLC

DUAL Gate Operator System

Installation Manual

2002XLS

PROFESSIONAL RESIDENTIAL

ACCESS

SYSTEMS

PROFESSIONAL INSTALLATION RECOMMENDED!

Содержание 2002XLS













































Результаты поиска

Содержание 2002XLS

Отзывы:

Похожие инструкции для 2002XLS

Бренды по названию

Популярные бренды

GTO 2002XLS, Руководство по установке

Результаты поиска

Содержание 2002XLS

Отзывы:

Похожие инструкции для 2002XLS

Бренды по названию

Популярные бренды