14
GMG-200
310-2310-001 EN20
OPERATION
6 Operation
TIPS AND RECOMMENDATIONS
Before beginning operation of the GMG-200:
−
Check the battery charge and recharge if necessary.
−
Verify that the surface of the attached sliders complies with the stan-
dard specification.
−
Clean the sliders with the proper sanding block.
6.1 Preparing Measuring Surface
1
Clean the surface to be tested to remove dust and dirt (Refer to DIN 51131).
2
Spray lubricant on the area to the tested.
TIPS AND RECOMMENDATIONS
As the lubricant, use pressure-free water pursuant to DIN 51131 or use the lubri-
cant to which the flooring is normally subjected and that may cause an accident
during everyday use.
6.2 Preparing for Strap Extraction
Strap extraction
1
Grasp the strap grip and draw the traction cable out of the
device. How quickly the device releases the strap is a factor of
the tensile force applied.
2
As the strap is being extracted, its length is shown in the dis-
play as a percentage of the total length.
3
The strap stops automatically when it is released (tensile force
= 0) or when it is completely extracted (100%).
4
When completely extracted (100%), the strap is 80 cm long.
vv
Pull out strap !
Then fix.
strap length 67%