GTE GMG-200, Руководство по эксплуатации

Страница: 18 / 33

PREPARING FOR OPERATION
13 GMG-200 310-2310-001 EN20
1
Turn over the GMG-200 and rest it on the handles.
2
Detach the slider plate.
(–› Chap. 5.2, Attaching Slider
Plate)
3
Clamp the slider plate in a vise.
4
Detach the glued sliders from the slider bases.
5
Remove adhesive residue from the slider bases.
6
Apply a thin coating of adhesive to the entire surface
of the slider bases.
(Use superglue for rubber sliders and “Pattex Alleskle-
ber” for leather sliders!)
7
Place the sliders on the runners, align them and press them into place.
TIPS AND RECOMMENDATIONS
Allow the adhesive to dry before use!
TIPS AND RECOMMENDATIONS
Use the proper sanding block to clean the sliders before every use!