PREPARING FOR OPERATION
11
GMG-200
310-2310-001 EN20
1
Switch off the device.
2
Connect the power supply to an electrical outlet
(100 - 240 V AC).
Z
Power supply LED indicator red: Power supply is ready
for use.
3
Connect the power supply to the GMG charging
socket.
Z
Power supply LED indicator orange: Device begins
charging.
Z
Power supply LED indicator green: GMG-200 is par-
tially charged.
It takes 14 hours for the device to be completely charged!
4
Disconnect the power supply.
TIPS AND RECOMMENDATIONS
When the GMG-200 is not is use, change it once a month for at least
10 - 12 hours. Disconnect the power supply when charging is completed!
TIPS AND RECOMMENDATIONS
The device has deep discharge protection. After ten minutes of idling or
no data transmission, the device switches itself off!
5.2 Attaching Slider Plate
1
Turn over the GMG-200 and rest it on the handles.
2
Place the desired slider plate on the floor plate of the
GMG-200.
3
Use an Allen key (size 3.0) and three screws to secure
the slider plate.
