GTE CoboSafe-Scan, Руководство по эксплуатации

Страница: 13 / 28

13 CoboSafe-Scan 325-2810-013US13
DESCRIPTIOn OF THE COMPOnEnTS
Film type Color
Film A: lW (low pressure) bluish
Film A: llW (super low pressure) yellowish
Film C: developer whitish
Both film types are described in the supplier documentation.
Note the surface
Film A and Film C both have a reflective and a matte surface. The matte surface is
the functional side (color change or developer) in each case.
The Fujifilm Prescale film is available for diffe-
rent pressure ranges. The types lW and llW
are used for CoboSafe-Scan. The type desig-
nation is shown on the label of the packaging
unit [1].
you will find the original instruction manual
in the packaging. It contains information on
operation and storage. Observe these inst-
ructions and the supplementary instructions in
this manual. Please use the CoboSafe-Vision
software and the related user manual for the
application oriented evaluation.
6.1.1 Safety-Relevant Information
The following properties must be considered when handling the film:
■
Fujifilm Prescale films are sensitive to moisture. The measuring surface must not be
touched, as touching it can lead to a change in color. Hold the film only on the edge,
outside the actual measuring surface.
■
The pressure films must not come into contact with other liquids.
■ Only films of the same type and from the same packaging unit may be used for the
measurement.
■ The pressure films have limited durability. Only use pressure film whose shelf life has not
expired.
■
Only use film that is correctly packaged and protected in UV-resistant sleeves.
■ The coloring can change under UV radiation. Therefore, the pressure images must be
scanned in a maximum of 20 minutes after the measurement.
Fig. 4: label
1