GT POWER GT7005EFi, Руководство по эксплуатации

Страница: 16 / 28

16. 17. www.gtpower.co.nz
www.gtpower.co.nz
GT7005EFi
NOTE: Ensure all electrical applicances are
in good working order before connecting
them to the generator. If an electrical appli-
ance becomes abnormal, sluggish or stops
suddenly, shut off the engine immediately
and disconnect the appliance.
Output and Overload Indicator
Under normal operating conditions, the out-
put indicator light (green) will remain on. If
the generator is overloaded (over 6.5kVA),
or the connected appliance is short circuited,
the output indicator light (green) will switch off
and the overload indicator light (red) will turn
on. The AC output will switch off, but the en-
gine will continue running.
If the overload indicator light (red) is on, dis-
connect the electrical appliances and press
the “RESET” button to recover the output.
Once the overload indicator light (red) switch-
es off and the output indicator light (green)
switches on, you may reconnect electrical ap-
pliances. If the overload indicator light (red)
doesn’t switch off, and the output indicator
light (green) doesn’t switch on, stop the en-
gine and check the generator.
Oil Alert System
The oil alert system is designed to prevent
engine damage caused by an insufficient
amount of oil in the crankcase. Before the oil
level in the crankcase falls below a safe limit,
Stopping the
Generator
Normal Shut Down
1. Switch off the connected electrical appli-
ances and pull out their plugs.
2. Turn fuel switch to “OFF” position and let
engine run out of fuel. This will extend the
life of the fuel delivery systems.
Fuel Switch
ON
OFF
3. Turn engine switch to “STOP” position.
Oil Alert Indicator
Light (Red)
Output Indicator
Light (Green)
Output Indicator
Light (Red)
Emergency Shut Down
1. Turn the engine switch to the “STOP” po-
sition.
2. Switch off any connected electrical appli-
ances and disconnect from the generator.
3. Turn the fuel switch to the “OFF” position.
the oil alert system will automatically shut the
engine down (the engine switch remains in
the “RUN” position).
If the oil alert system shuts the engine down,
the oil alert indicator light (red) will turn on
and the engine will not start.