GT POWER GT7005EFi, Руководство по эксплуатации

Страница: 6 / 28

6. 7. www.gtpower.co.nz
www.gtpower.co.nz
GT7005EFi
NOTE: Do not operate the generator without
the wheels and supports, otherwise the air
filter will be exposed to debris.
The following accessories are supplied with
the generator:
Wheels x 2 Shafts x 2
R cotter pin x 2 Support x 2
M6*40 Bolt x 4
Assembling Procedure
1. Ensure the generator is not running, and
lift it (refer to “Transporting and Storage”
on page 21)
2. Put one wheel through a shaft, and fit onto
the wheel base of the generator.
3. Lock the end of the shaft with R cotter pin.
4. Install one support with two bolts using a
10mm spanner.
5. Install the second wheel and support, refer
to steps 2 and 4 above.
Assembling the
Generator
Unpacking
the Generator
WARNING!
Always have assistance when lifting
the generator. The generator is heavy;
lifting it could cause bodily harm. Avoid
cutting on or near staples to prevent
personal injury.
1. Carefully cut packing tape on top of carton.
2. Fold back top flaps to reveal instruction
manual on top of the upper packing tray.
Remove manual and save it for reference.
3. Remove and discard upper packing tray.
4. Unfold top of the plastic bag enclosing the
generator.
5. Lift generator out of plastic bag and carton.
6. Recycle or dispose of packaging materials
properly.