GT POWER GT3600ES, Руководство по эксплуатации

Страница: 6 / 20

GT3600ES
6
When Adjusting or Making
Repairs to the Generator
• Disconnect the spark plug wire from
the
spark plug and place the wire where it
cannot contact spark plug.
When Testing for Engine Spark
• Use approved spark plug tester.
• DO NOT check for spark with spark
removed.
WARNING: Starter and other rotating
parts could entangle hands, hair,
clothing, or accessories resulting in
serious injury.
• NEVER operate generator without
protective housing or covers.
• DO NOT wear loose clothing, jewellery or
anything that could be caught in the
starter or other rotating parts.
• Tie up long hair and remove jewellery.
• DO NOT modify generator in any way.
NOTICE: Exceeding generators
wattage/amperage capacity could
damage generator and/or electrical
devices connected to it.
• DO NOT exceed the generator’s wattage/
amperage capacity. See Don’t Overload
Generator in the Operation section.
• Start generator and let engine stabilize
before connecting electrical loads.
• Turn electrical loads OFF and disconnect
from generator before stopping generator.
NOTICE: Improper treatment of
generator could damage it and
shorten its life.
• Use generator only for intended uses.
• If you have questions about intended use,
ask dealer or contact local service center.
• Operate generator only on level surfaces.
• DO NOT expose generator to excessive
moisture, dust, dirt, or corrosive vapor.
• DO NOT insert any object through cooling
slots.
• If connected devices overheat turn
them off and disconnect them from
generator.
- or electrical output is lost.
- or equipment sparks, smokes, or emits
flames.
- or unit vibrates excessively turn them
off and disconnect them from generator.
Unpacking the
Generator
• Set the carton on a rigid flat surface.
• Remove everything from carton except
generator.
• Open carton completely by cutting each
corner from top to bottom.
• Leave generator on carton to install wheel
kit.
Packing Contents
1 x Owner’s Manual
2 x Wheels
1 x Handle Assembly
2 x Wheel Axles
1 x Hardware Bag (includes 1 x Spark Plug
Socket; 1 x Extension Housing)