GST GST301, Инструкция по установке и эксплуатации

Страница: 5 / 18

GST301 Extinguishing Control Panel
Installation and Operation Manual
Page 3
2) Indicators

Power Green. Lighted when power supplied.

AC Fault Amber. Lighted when there is AC Fault.

Batt Fault Amber. Lighted when battery voltage is below 5V.

Gas Release Red. Flashes during delay time. Lighted after gas
released. Extinguished by reset.

Fire Red. General fire indication. Lighted by any fire signal.
Extinguished by reset.

Silence Green. Lighted if the panel is silenced. Extinguished when
it re-sounds.

Auto Enable Green. Lighted if the panel is in automatic mode. Off for
manual only mode.

Evacuate
Green. Flashes when “Evacuate” key is pressed.
Extinguished by reset.

DELAY TIME Red. Indicating the time (in second) before gas releasing.

Zone1 ACTIVE Red. Flashes when Zone1 is in alarm. Lighted steadily
after it’s silenced. Extinguished by reset.

Zone1 Fault/ISO Amber. Flashes when Zone1 has any fault. Off when the
fault is removed. Steadily lighted when Zone1 is isolated.

Zone2 ACTIVE Red. Flashes when Zone2 is in alarm. Lighted steadily
after it’s silenced. Extinguished by reset.

Zone2 Fault/ISO Amber. Flashes when Zone2 has any fault. Off when the
fault is removed. Steadily lighted when Zone2 isolated.

Aux Zone ACTIVE Red. Flashes when the AUX Zone is in alarm. Lighted
steadily after it’s silenced. Extinguished by reset.

Aux Zone Fault/ISO Amber. Flashes when the AUX zone has any fault.
Steadily lighted when the AUX zone is isolated. OFF
when the fault is removed.

Cylinder ACTIVE Green. Flashes when the release output is active.
Extinguished after output finished.

Cylinder FAULT/ISO Amber. Flashes when the gas release output circuit has
any fault. Lighted steadily in isolated mode.

Start ACTIVE Green
. Flashes when the “START” key on the panel or the
Emergency Start Button in field is pressed.

Start FAULT Amber. Lighted by fault with Emergency Start Button
Circuit. Extinguished when fault removed.

Stop ACTIVE Green
. Flashes when the “STOP” key on panel or the
field Emergency Abort Button is pressed.

Stop FAULT Amber. Lighted by fault with Emergency Abort Button
Circuit. Extinguished when fault removed.

Pressure Switch ACTIVE Green. Lighted if the pressure switch is active (gas
released) or after gas release output started (no pressure
switch). Extinguished by reset.