Bell Mobility User Manual
In-building Repeater
13
3.4 Functions
Parameter
Specification
Gain Control
• Adjustable DL and UL Gain range 50~80dB (800MHz)
• Display default Gain and current Gain function
AGS
Auto Gain
Setting
• AGS (Auto Gain Setting) Use for convenient Set-up
AGC
Auto Gain
Control
• It always operates in Downlink AGC ON status
• To maintain same Downlink output power despite flexible input signal strength.
• To add or subtract Attenuation level referring to AGC Power Limit level.
• Used with the Automatic Setup (Auto Gain Setting)
ALC
Auto Limit
Control
• To limit output power as far as default range
• Used for DAS configuration and when oscillation/isolation is a concern
• Automatic Gain decrement when output power of repeater is higher than default level
• Automatic Gain recovery when output power of repeater is reduced.
• Shutdown when output power is higher than default level in Minimum Gain
• Automatic Recovery Algorithm conversion after Shutdown status
Band Select
• B+B’ Band (14MHz)
