GSS PTDT 1000, Руководство по сборке

Страница: 29 / 48

- 29 - PTDT 1000
—> All stations from the channel strip will be read, and then displayed
with name and station type.
—> If no station is found, the following error message will appear in the
display: " FILTER no Service ".
In this case, check the configuration of the antenna system and
head-end station, as well as the previously adjusted settings for the
cassette and the components connected to the ASI input.
—> The display shows e.g.: Bx 4A TV + 01/10
Das Erste
Meaning of the indicators in the example:
" Bx 4A " Slot 4, channel strip " A "
" TV " TV channel type
" + " The currently selected station is activated.
" 01/10 " The 1st of 10 stations is being displayed.
" Das Erste " Station name
Further possible terms displayed:
" RA " Radio channel type
For radio stations, the background of the screen of
the connected TV or test receiver is darkened.
" – " The currently selected station is deactivated.
" * " The star means that the TV or radio stationselect-
ed is encoded. To enable the stations, the CA
module and the appropriate smart card of the
station provider are required.
—> If a service number (e.g. " 131 ") appears instead of " TV " or " RA ",
this indicates that an unnamed station or an undefined data stream
is being received.
• Use the buttons to call up the stations in sequential order, then use
to activate (indicated by " + ") or to deactivate them (indicated by
" – ").
Factory default: All stations are deactivated.
• Press the button.
• Set the station filters of channel strip " B " and " ASI " in the same way as
channel strip " A ".