GSS PTDT 1000, Руководство по сборке

Страница: 15 / 48

- 15 - PTDT 1000
4 t
he Control Panel at a glanCe
4.1 m
enu items
Programme the cassette using the buttons on the control unit of the head-end
station. The two-line display of the control unit then shows the menus.
The parameters and functions to be set are underlined.
Use the key to select the following main menu items:
– Input signal path
– Output signal path
– Channel strip
– Channel / frequency setting
– Output channel / output frequency
– Output level
– Input channel
– Hierarchical modulation
– Station filter
– CA module (if available)
– Output signal
– Transmission parameters
– Station identification
– Output data rate
– Substitute signal
– Transport stream and ORGNET-ID
– Network Information Table (NIT)
– Network/operator identification
– Deleting a PID
– Renaming a PID
– Factory reset
4.2 C
ontrol Panel
The key pad on the head-end station is used to scroll through the menus step-by-step:
scrolls forward through the menus.
select parameters in the menus.
set values, initiate actions.
selects sub-menus.
scrolls backward through the menus.
saves all entries.
BE-Remote V 45
PROFESSIONAL