4 The control panel at a glance
4.1 Menu items
Program the cassette using the buttons on the control unit of the head-end station.
The two-line display of the control unit then shows the menus.
The parameters and functions to be set are underlined.
Use the
key to select the following main menu items:
– Setting Ethernet parameters
– Input signal path
– Output signal path
– Channel strip
– Selecting channel / frequency setting
– Output channel / output frequency
– Output level
– Selecting the input
– IP parameters
– IP address of the input transport stream
– LNB oscillator frequency
– Input symbol rate
– Input frequency
– Station filter
– CA module (if available)
– QAM modulation
– Stuffing
– Substitute signal
– Transport stream / ORGNET-ID
– Network Information Table (NIT)
– Network/operator identification
– Deleting a PID
– Renaming a PID
BE–Remote
PROFESSIONAL
V 40
