GSS PMDQ 1000, Руководство по сборке

Страница: 2 / 54

- 2 - - 2 -
Contents
1 Safety regulations and notes ......................................................................................4
2 General information ..................................................................................................5
2.1 Packing contents ..........................................................................................5
2.2 Meaning of the symbols used ........................................................................5
2.3 Technical data
.............................................................................................5
2.4 Description .................................................................................................6
2.4.1 Input signal path “INROUTE” ..............................................................6
2.4.1.1 Menu setting “1=MA 2=MB” ..............................................6
2.4.1.2 Menu setting “A+B=1 2=OFF” ............................................7
2.4.2 Output signal path “OUTROUTE” ........................................................7
2.4.2.1 Menu setting “1=>MA 2=>MB” ..........................................7
2.4.2.2 Menu setting “1=>ASI MA=OFF” ........................................8
2.4.2.3 Menu setting “2=>ASI MB=OFF” .........................................8
2.4.3 General ...........................................................................................8
2.5 Software query ............................................................................................9
2.6 How the TPS module works .........................................................................10
2.7 Explanation of the term “symbol rate” ..........................................................11
3 Assembly ................................................................................................................ 12
3.1 Installing the cassette ..................................................................................12
3.2 EMC regulations ........................................................................................12
3.3 Cassette overview
......................................................................................13
3.4 Connecting the cassette ..............................................................................14
3.5 Retrofitting a CA module ............................................................................14
4 The control panel at a glance ................................................................................... 15
4.1 Menu items ...............................................................................................15
4.2 Control panel
............................................................................................16
5 Programming ..........................................................................................................16
5.1 Preparation ...............................................................................................16
5.2 Programming procedure .............................................................................17
5.2.1 Channel strips “A” (without CA module) and “B” ........................................17
5.2.2 Channel strip “A” – Tuner settings .............................................................20
5.2.3 Channel strip “A” with CA module ............................................................20
5.3 Programming the cassette ..........................................................................21
Selecting the cassette, displaying the software version ....................................21
Setting the Ethernet parameters ...................................................................22
Setting the IP address of the cassette ............................................................22
Setting the address range ...........................................................................23
Setting the address of the gateway ..............................................................24
Setting the UDP port ...................................................................................24
Selecting the input signal path .....................................................................25
Selecting the output signal path ...................................................................25
Setting the ASI transfer rate .........................................................................26
Setting the ASI options ...............................................................................27