- 23 -
HDMT 660 CI TPS
s
tation
filter
The default setting for the station filter is "
off
".
In this menu you define the stations received to be transmitted. If stations are
deactivated the output symbol rate is reduced.
Bx 1A
/B
Filter
PROGRAM
off
01/04
Bx 1A
/B
TV +
ZDF
M
S
•
Press the button.
—>
All
stations from the channel strip
will be read, and then displayed
with name and station type.
—> If no station is found, the following error message will appear in the
display "
FILTER: no Service
".
In this case, check the configuration of the antenna system and
head-end station, as well as the previously adjusted settings for the
COFDM-QAM module.
—> The display shows e.g.:
Bx 1A TV + 01/04
ZDF
Meaning of the indicators in the example:
"
Bx 1A
"
Slot 1, channel strip "
A
"
"
TV
"
TV channel type
"
+
"
The currently selected station is switched on.
"
01/04
"
The 1st of 4 stations is being displayed.
"
ZDF
"
Station name
Further possible terms displayed:
"
RA
"
Radio channel type
For radio stations, the background of the screen of the
connected TV or test receiver is darkened.
"
–
"
The currently selected station is switched off.
"
*
"
The star means that the TV or radio station selected
is scrambled. To enable the stations, the CA module
and the appropriate smart card of the station pro-
vider are required.
—> If a service number (e.g. "
SERVICE 131
") appears instead of "
TV
" or
"
RA
", this indicates that an unnamed station or an undefined data
stream is being received.
