- 19 -
STC 4-16 CT ME
101
In column
Name
, enter a personal input name.
—> If dCSS/Unicable II is activated you can assign the four levels of a
satellite to each input.
102
With button
LNB Power
switch on or off the LNB power supply (max.
500 mA). If necessary switch the 14V/18V power supply to 14V "only"
using button
14V fixed
.
103
dCSS/Unicable II Mode (page 42) on/off.
104
In column
Name
, you can enter a personal transponder name
—> If you delete a transponder name, the name of the first station of
this transponder is entered. If the transponder will be changed, the
transponder name will NOT be changed automatically!
105
In column
Input
, select the desired input for each tuner.
106
In column
f (MHz)
, enter the desired input frequency for each tuner.
107
In column
SR (kS/s)
, enter the related input symbol rate for each tuner.
108
In column
f
offset
, the current frequency offset is displayed.
—> The frequency offset should not exceed
± 1.5 MHz
!
IF necessary correct the LNB oscillator frequency (if all transpond-
ers of one input are affected) resp. the input frequency (if only one
transponder is affected) accordingly.
109
In this column, the C/N is displayed with reserve.
—> The maximum displayed C/N value is 15.0dB at DVB-S resp.
20.0dB at DVB-S2. This means the actual value is ≥15/20dB.
112
Before leaving the menu, changes must be transferred to the head-end
station!
• Therefore click on button
.
—> After that
is displayed for a short time in the upper right corner.
