GSM Gecapp crono Wi-Fi, Руководство пользователя

Страница: 23 / 64

23
-H
-C -C
+C
+C
-C
LU
MINUTES: press the touch area of MINUTES and use the keys
“
-H
” and “
+H
” to set the MINUTES (Fig.61).
-H +H
Fig.61
LU
-H +H
DAY: press the touch area of DAYS and use the keys “
-H
”
and “
+H
” to set the curernt
DAY
(Fig.62).
Fig.62
GI
After programming the HOUR, MINUTES and DAY +H
confirm the settings by pressing the touch area of
TEMPERATURE . (Fig.63)
Fig.63
MANUAL PROGRAM
To activate the display, simply touch it.
Hold down for about 2 seconds the key Fig. 64) to switch to
MANUAL mode.
The GecApp Crono Wi-Fi behaves now as simple room thermostat.
By tapping “
+C
” or “ -C ” (Fig.65) you will increase or decrease the TEMPERATURE by 0.2°C in
WINTER
and
SUMMER
mode.
Hold the keys
+C
” or “ -C ”; the temperature will vary by 1.0°C .
After a few seconds without performing any operation, or simply by touching the touch zone of
TEMPERATURE you can switch to MANUAL interface.
If the set temperature will be greater than the temperature measured, the display will show
"
SYSTEM ACTIVATION CONTACT
" ” (Fig.66).
To exit MANUAL programming press and hold 2 seconds the key “ .
+C
LU
-H +H
Fig.64 Fig.65 Fig.66