GSM Gecapp crono Wi-Fi, Руководство пользователя

Страница: 19 / 64

19
+H +H
+H
+H -H
SOND
The function "Sond" allows you to set the internal or the external temperature probe (Code
2.030.1037) . This setting is required to set inside the
Programmable thermostat
appropriate
compensations.
From the HOME PAGE enter the Settings MENU by pressing simultaneously the touch area of
TEMPERATURE measured and the touch area of the HOUR.
-Press the keys “
-H
” or “
+H
and select “ Sond ” .
-Press and hold for about 2 seconds Sond (Fig.39).
With the keys “
-H
” o “
+H
” choose which type of probe to use between the internal probe "
Int
" (Fig.
40) and the external probe " EXt " (Fig 41).
To confirm press and hold for about 2 seconds the probe type " Int " or " EXt " to use. One flash will
confirm the choice, then GecApp crono Wi-Fi will return to the Home page .
-H -H -H
Fig.39 Fig.40 Fig.41
RST (Reset the programmable thermostat)
The " rSt " function allows you to reset the GecApp crono Wi-Fi.
The " rSt" reset all parameters of the Programmable thermostat except for those of the Wi-Fi
network. From the HOME PAGE enter the Settings MENU by pressing simultaneously for 2
seconds the the touch area of TEMPERATURE measured and the touch area of the HOUR.
-Press the keys “
-H
” or “
+H
and select rSt .
-To reset GecApp crono Wi-Fi hold for about 2 seconds " rSt "
(Fig.42).
When starting the RESET function, the programmable thermostat performs a control cycle by
turning on all segments of the display, activating the charge for a few seconds (Fig. 43),
disabling the Wi-Fi network connection and resetting the temperature program.
After a few seconds, the Programmable thermostat displays the Home page (Fig. 44).
If you want to re-enable the
Wi-Fi
module, enter the "
Wi-Fi submenu
" of the
programmable
thermostat
and set it to
ON
.
%
+C
-H
MON TUE WED THU
FRI SAT SUN
+H
+C
LU
-H +H
-C
-C
Fig.42 Fig.43 Fig.44