Page 5 of 8
Model:
MPPT60-1
Operating Instructions
Please read these instructions before use
1700W Solar Battery Charger
Maximum Power Point Tracker
Changing Battery Type Setting Procedure
1.
Ensure all the MPPT wires are disconnected. Disconnecting PV first.
2.
Remove the 5 front panel screws and the move the front panel ajar. Then remove 1 middle rear screw
on the back panel (bottom middle below fan) then slide out bottom cover –
see Figure 1
.
3.
Locate connector J4 –
see zoom window in Figure 1
.
4.
Move link on J4 to vented position or Remove link for Lithium batteries –
see Figures 2 ,3 ,4.
5.
Slide in the cover and fit front panel carefully, secure the front panel again with the 5 screws and
the 1 rear screw.
•
The above procedure can be repeated to revert a different battery chemistry setting –
see Figure 3
.
Figure 1.
More information https://www.caravansplus.com.au
