GSK983Ta-H/ GSK983Ta-V Turning CNC System Connection Manual
2
The joints between wires and the system or drive unit should be tight and firm. The low-current
type wires such as signal wires and control wires should be laid far away from heavy current and
electromagnetic interference, and be arranged in an uncurled manner as far as possible, because
winding annularly could easily cause the acquisition of interference signal.
.
6
、
Interference suppression
Connect the RC circuits at the two ends of AC coil in parallel. The RC circuits should be closed to
inductive load as far as possible. Connect FWD at the ends of DC coil reversely in parallel. Connect
the surge absorber at the winding head of AC motor.
AC220V
+24V
0V
M
3
～
surge absorber
KM
