GSi GrainVue, Руководство по установке

Страница: 49 / 58

7
Activating the Cable Monitoring
Hub
1. The Cable Monitoring Hub (16) will be delivered to site turned OFF. You can use the provided
magnetic key to turn ON the Cable Monitoring Hub (16).
2. To turn the Hub ON, place the magnetic key over the left side of the Solar Array Shield. On the right
side of the Solar Array, a green LED light will turn on indicating the system is now ON.
3. Once the green LED light is on, remove the magnetic key and notice a red LED light turn on. The
red LED will remain on for 30 seconds and will then turn off to save power. The system will continue
to remain ON even after the red LED turns off.
4. To turn OFF the Cable Monitoring Hub (16), place the magnetic key over the left side of the Solar
Array Shield. Once placed, the same green LED light will begin to flash.
5. Once the light begins to flash, you have three seconds to remove the magnetic key to turn OFF the
Cable Monitoring Hub (16).
Figure 7-1 Activating the Cable Monitoring Hub
16
Cable Monitoring Hub
PNEG-2347 Cable Monitoring System 49