Installing the Front and Rear Anchor Plates
To secure the dryer, you must install the front and rear anchor plates to the leg stand bottoms, thereby
enabling the legs to be anchored to the concrete foundation.
1. Use a flange bolt (8) and a flange nut (9) to attach the rear leg anchor plate (6) to the bottom of the
leg stand (10).
2. Position the front leg anchor plate (7) below the rear leg anchor plate (6) and use two flange bolts
(8) and flange nuts (9) to attach the anchor plate to the front of the leg stand (10).
3. Secure the leg stand (10) to the concrete foundation using concrete anchor bolts (not supplied).
Figure 3-2
Leg anchor plate assembly
6
Rear leg anchor plate (BLK-10057)
9
5/16 in. flange nut (S-3611)
7
Front leg anchor plate (BLK-10058)
10
Refer to the
Leg Stand Height Options, page
for leg stand (D01-XXXX).
8
5/16 x 3/4 in. flange bolt (S-6606)
PNEG-2132
Pressure Cooled Quiet Portable Dryer
25
