GSI Group PNEG-1451, Руководство по установке

Страница: 85 / 118

7. 4.00" Corrugation Farm Commercial Hopper Tanks (FCHT) 4-6 Rings
PNEG-1451 Ladder, Safety Cage and Platform for Hopper Tanks 85
Vertical Supports
After all three (3) hoop assemblies are in place, attach the 48" vertical supports (A) from hoop assembly
to hoop assembly, as shown in
Figure 7N . This requires ten (10) supports, five (5) between each set of
hoops. The second set of vertical supports (A) must be bent at the flat area to allow for the tapering of the
bottom hoop assembly. Use 5/16" x 3/4" bolts (unless otherwise noted) with the head of the bolt to the
inside of the safety cage.
Figure 7N Vertical Supports
44" and 48" Safety Cage
Attach the vertical support (A) pieces to the existing hoop halves above using the 5/16" x 3/4" bolts and
nuts (with the heads on the inside of the cage). Fasten two (2) hoop halves together and bolt to other end
of vertical supports (A). Attach cage hoop brackets to ladder, see general detail information
on Page 12
for proper attachment. Once cage hoop brackets have been installed, attach cage hoop halves and tighten
bolts. Repeat installation for each safety cage required.
Figure 7O 44" Safety Cage
Figure 7P 48" Safety Cage
Ref # Part # Description
A LS-6713 Safety Cage 48" Vertical Supports
B
Use 5/16" x 1-1/4" bolts at hoop
assembly overlap.
Ref # Part # Description
A LS-4353 Safety Cage 44" Vertical Support
Ref # Part # Description
A LS-6713 Safety Cage 48" Vertical Support
B LDR-4201 Safety Cage Hoop Half