GSI Group PNEG-1451, Руководство по установке

Страница: 66 / 118

6. 2.66" Corrugated Commercial Hopper Tank 10-22 Rings
66 PNEG-1451 Ladder, Safety Cage and Platform for Hopper Tanks
Left Hand Platform and Platform Support Assembly
NOTE: Mount the platform mounting angles (C) supports on the column first. Next, assemble the platform
floor (N) onto the support frame. Do not tighten platform support (A) to floor brace (E) bolts until
the floor and toe plates (L) are secure.
Assemble the platform support (A) frame using 5/16" x 3/4" truss head bolts and nuts. Align holes on the
platform floor (M) with the holes on platform supports (A) and bolt together using 5/16" x 3/4" truss head
bolts and nuts. Attach platform toe plates (K) at the same time as attaching the platform floor (M). The
vertical entrance angle (H) bolts to the platform floor (M), toe plate (K) and platform support (A). The
handrail post bolts to the platform floor (A) and toe plate (K) as shown in
Figure 6AB on Page 67 .
Figure 6AA Left Hand Platform Support Assembly
Ref # Part # Description
A LS-6698 Platform Support (2)
B LS-6699 Left Hand Diagonal Support Angle (Brown) (1)
C TDP-5008N Platform Mounting Angle (Fluorescent Green/Black) (2)
D LS-6700 Right Hand Diagonal Support Angle (Blue) (1)
E LS-6701 Floor Brace (Orange) (3)
F Use upper hole in diagonal brace when connecting to platform support.
G Upper Hole