GSD Compuprint 9065, Руководство пользователя

Страница: 109 / 128

User Manual 9065/9065plus
MAN10772-00 107
Error Handling
When an error condition occurs:

the printer is disabled;

the first message on the display indicates the error, while the second message gives more details
concerning the error conditions.
Press always the ON LINE key to reset the error condition
Error Message Description
Messages Indication Solution
A.G.A NOT OPER
ADJUST THE GAP The automatic gap adjustment
(A.G.A) is not enabled. Press the ON LINE key to reset the error
condition. Adjust the print head gap to a fixed
distance. Select the print head fixed gap
adjustment function in the
Program Menu
.

Press the PROGRAM key when the printer
is disabled (READY indicator unlit) to enter
the
Program Setup
.

Press the ↓ key until the USER MACRO
function is displayed. Press the → key
until the desired macro is displayed
(MACRO#
x
).
Press the → key to enter the macro parameters.
Press the ↓ key until the FIXED GAP parameter is
displayed. Press the → or ← keys to select the
fixed gap adjustment values. From FIXED GAP 1
(simple fanfold paper) to FIXED GAP 4 (multipart
fanfold paper).
BUFFER OVERFLOW
CHARACTER LOST A buffer overflow condition
occurred (for the serial
interface). Turn the printer off and on again, or press the
PROGRAM and ON LINE key successively to clear
the buffer.

Press ON LINE to clear the error.

Increase the buffer size.

Check the handshaking protocol in the
CONFIGURATION SET UP against the
host protocol.

Restart the print job.
DATA SET OFF A remote connection serial
interface error condition was
detected. The Data Set Ready
or Data Carrier Detect signal
was not
sensed.
Check for the correct serial cable for the remote
Connection.

Press the ON LINE key to reset the
error condition.
FRAMING ERROR
CHARACTER LOST An error on the serial
transmission occurs.
The printer recognized a wrong
bit.printer recognized
a wrong bit.
Turn the printer off and on again, or press the
PROGRAM and ON LINE key successively to clear
the buffer.

Press ON LINE to clear the error.

Increase the buffer size.