GSC 640V2520AH, Руководство пользователя

Страница: 29 / 36

27
384V500AH
640V2520AH
Above data is for regular parameters, such as voltage, capacity can be customized
according to requirements
Overview of Upper Computer Software
Main interface-mainly used as a visual display area for basic battery information,
selection of upper computer function window, BMS basic information display, and battery
failure prompt.

Upper computer function area selection button: system overview / monomer information /
calibration / firmware upgrade, click on the corresponding Chinese character area can be
switched to the corresponding upper computer function window.

VCC voltage is equal to Key ON or charge detection signal. If the difference is too large
(more than 3V), please contact BMS manufacturer for support.

Charger output voltage / charger output current, these two displays are the charging data
sent by the charger to the BMS during charging, which should be consistent with the
charger display.

Charging state / heating refrigeration state / current sensor fault three are customized
functions, can be ignored.

Insulation testing / insulation Rn / insulation Rp represents insulation values tested by
insulation testing (no insulation function negligible).

CC 2 represents the CC 2 voltage detected BMS the national standard fast charge (non-
national standard fast charge can be ignored).