6
MP handle
3 Product description
Instruction book, IQAN- LC5-X05
MP handle
The IQAN-LC5-X05 is designed to be used with the Multi-Purpose (MP) handle. The
MP handle together with a IQAN-LC5-X05 base will have a Deutsch DTM connector
for connection to external device (i.e., vehicle wire harness).
In order to reduce operator fatigue, the MP handle incorporates a hand rest, and is
designed for both left and right-handed use.
To extend operating life the housing is made of a corrosive-free material, and is
specially adapted for moisture drainage to protect the the system electronics. The MP
handle uses a bellow that can be quickly changed to simplify field replacement. The
cable between base and handle is routed directly through the base plate, eliminating the
risk of damage and simplifying field service, while the use of a single circuit board and
Hall effect sensors minimise the number of components and moving parts.
The IQAN-LC5-X05 parts.
The handle's parts
MP handle consists of:
1 Bellows, -MP handle.
2 Handle, -MPB2W2T1 shown, (other configurations are possible).
3 Momentary buttons.
4 Proportional thumbwheel (-MP handle thumbwheel has dual, mirrored outputs).
5 Momentary trigger button.
6 Cable and connector for -MP (6 pos. or 12 pos., depending on handle functions).
3
4
2
6
1
5
