10
specified voltage may cause a serious injury to
the user as well as damage the tool.
IMPORTANT: This appliance is not intended
for use by persons (including children) with re-
duced physical, sensory or mental capabilities
may be different or reduced, or lack of experi-
ence or knowledge, unless such persons are su-
pervised or trained to operate the product by
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.
TOOL USE AND CARE
Do not force the power tool. Use the correct
tool for the application. The correct tool will
do the job better and more safely at the rate
that it was designed to work at.
Do not use tools if switch does not turn it on
or off. Any tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the plug from the power source
before making any adjustments, changing ac-
cessories or storing the tool. This preventive
safety measures reduce the risk of accidental
starting of the tool.
When the power tool is not in use, store it out
of the reach of children, and do not allow in-
dividuals who are not familiar with the power
tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended by
the manufacturer of your model. Suitable ac-
cessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened
edges, are less likely to stuck in workpieces or
easier to control.
Is recommendable to use a safety device suit-
able, such a thermal and differential switch
when you are using an electric equipment.
SERVICE
Tool service must be performed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel could re-
sult in a risk of injury.
SPECIFIC SAFETY RULES FOR
SANDER BELT
Never leave the switch of the ignition in the
position ON, before plugging the machine as-
sure that the switch is locked in the position
off.
When it starts up the machine let it run for
some minutes before using it in the work
piece. Look at the vibration or wave that it can
indicate a poor installation.
Never touch moving parts. Never place your
hands, fingers or other body parts near the
tool’s moving parts.
Assure the material to be worked. Never hold
it witch your hand or with your legs.
Handle tool correctly. Operate the tool accord-
ing to the instructions provided herein.
Do not drop or throw the tool. Never allow
the tool to be operated by children, individuals
unfamiliar with its operation or unauthorized
personnel.
Keep all screws, bolts and covers tightly in
place. Keep all screws, bolts, and plates tightly
mounted. Check their condition periodically.
Always wear eye protection and mask, espe-
cially when you are working at the level of
your head.
Keep motor air vent clean. The tool’s motor air
vent must be kept clean so that air can freely
flow at all times. Check for dust build-up fre-
quently.
This sander is not designed for carry out wet
sandy.
The inhalation dust is danger for your health.
Is recommend always use the system of extrac-
tion dust, for this connect the suction hose of
vacuum cleaner to connector of vacuum clean
leave for extraction of the sander using adapt-
ing when is necessary.
LB521B manual.indd 10
06/07/15 11:56
