Gruner F5J, Инструкция по сборке, Страница: 32 / 38

● The covering for the wing parts can be made in one piece. This saves attaching the
covering to the thin leading edge.
● The flaps and hinges, as with the tail surfaces, can be covered as one piece with the
wing.
● First attach the covering to the outer ends on top of the trailing edge F12. The overlap on
the flap side should be about 9 cm. Iron the covering to the top of the trailing edge
completely.
● Flip the flap completely over the bottom of the wing and iron the covering to the side of
the trailing edge and the side of the flap, effectively forming the hinge. Trim to an overlap
of 3mm at the edge of the flap and iron on.
59
Wing
●
Iron the covering to the top of the root rib. Trim overlap to 3 mm and iron to side of root rib.
● Iron covering on all outer edges of the flaps.
60
Wing