25
ENGLISH
Mains operation
Note:
7
Check that the mains voltage on the type
plate corresponds to your local mains sup-
ply.
If this is not the case, contact your specialist
dealer.
1
Plug the mains cable supplied into the »
AC ~
«
socket on the radio recorder.
2
Plug the mains cable into the wall socket.
Caution:
7
The device is connected to the mains with
the power plug. To fully disconnect the de-
vice from the mains, pull out the plug.
7
The mains plug is used to disconnect the de-
vice. It shall remain easily accessable and
should not be obstructed during intended
use.
POWER SUPPLY
---------------------------------------------------------------------------------------------------------------
Battery operation
1
Open the battery compartment by pressing the
catch and removing the lid.
2
Insert six batteries (6 x 1.5 V/type IEC R14/
UM2/C-size), observing the polarity marked
on the lid of the battery compartment.
3
Close the lid of the battery compartment.
Notes:
7
Do not expose the batteries to extreme heat,
caused for example by direct sunlight, heat-
ers or fire.
7
Remove the batteries when they are flat or
when you know that the device will not be
used for a long period of time.
The manufacturer accepts no liability for
damage resulting from leaking batteries.
7
The batteries are bypassed during mains
operation.
Environmental note:
7
Batteries, including those which contain no
heavy metal, may not be disposed of with
household waste. Please dispose of used
batteries in an environment friendly manner.
Find out about the legal regulations which
apply in your area.
Adjusting the volume
1
Adjust the volume with »
VOLUME
«.
Listening with headphones
1
Connect the headphones to the »
0
« head-
phone jack (ø 3.5 mm).
– This switches off the loudspeakers.
Caution:
7
Excessive sound pressure from the ear-
phones or headphones can cause hearing
loss.
Switching on and off
1
Switch on or off the device with »
ON/OFF
«.
Selecting the input source
1
Select the input source (USB, SD, CD or
RADIO) with »
USB SD CD RADIO
«.
Switching the Ultra Bass
System on and off
This function boosts the bass frequencies.
1
Switch the Ultra Bass System on and off with
»
UBS
«.
GENERAL FUNCTIONS
---------------------------------------------------------------------------------------
