27
ENGLISH
RADIO MODE
------------------------------------------------------------------------------------------------------------------------
Displaying DAB station information
1
To display information on the current DAB sta-
tion, press »
MODE MENU/INFO
« repeat-
edly.
– The following display appears in succession:
Information from the provider (e.g. the ac-
tual broadcast, the title of the song, the e-
mail address), the genre, the broadcasting
format, the current frequency, the bit rate,
reference to signal interference (at optimum
signal display »
Sig Er 0
«).
Setting Dynamic Range Control
(DRC) for DAB stations
When you activate Dynamic Range Control, you
can hear lower sounds better in a loud environ-
ment.
1
Open the setting mode by pressing and hold-
ing down »
MODE MENU/INFO
«.
– Display: »
SELECT Manual
«.
2
Select the option »
SELECT DRC
« with
»
PREV
« or »
NEXT
« and press »
e
II
« to
confirm.
3
Select one of the following options with »
PREV
« or »
NEXT
« and press »
e
II
« to
confirm.
»
DRC 0
« (off), »
DRC 1/2
« (low) or »
DRC
1
« (high).
Note:
7
The DAB station must support DRC.
FM radio mode
1
For the best FM reception, it is sufficient to ex-
tend the telescopic antenna and direct it ac-
cordingly.
2
Move the »
FM DAB
« switch to the »
FM
« po-
sition.
Tuning FM radio stations
Automatic station search
1
Activate the station search by keeping
»
PREV
« or »
NEXT
« pressed until the fre-
quency display changes to rapid run-through.
– The search stops when a station is found.
Manual station search
1
To move the frequency forward in steps, briefly
press »
PREV
« or »
NEXT
« several times.
– The frequency changes in steps of 50 kHz.
Storing stations to presets
You can store FM radio stations on 20 presets.
1
Select the FM radio station with »
PREV
« or
»
NEXT
«.
2
Press »
■/MEM.
« briefly to activate the memo-
ry function.
3
Select the desired station position with
»
V DOWN
« or »
Λ UP
«.
4
Press »
■/MEM.
« to save the station.
5
To store more stations, repeat steps
1
to
4
as
described above.
Selecting stored stations
1
Select the station preset position with
»
V DOWN
« or »
Λ UP
«.
Stereo/mono reception
If the signal from the FM stereo station is weak,
you can improve the sound quality by switching
to mono reception.
1
Press and hold down »
e
II
« to switch to mono
– Display: »
Mono
«.
2
Press and hold down »
e
II
« to switch to stereo.
– Display: »
Auto
«.
