Grundig PSN000, Руководство по обслуживанию

Страница: 43 / 70

91 ENGLISH
8 Select the line »Select Access Point« with
»
V
« or »
Λ
« and press » OK « to confirm.
– Present WPS-supported wireless networks
are scanned to display in the »Select Ac-
cess Point« menu.
9 Select the network that you want to connect
with »
V
« or, »
Λ
« and press » OK « to
confirm.
– 8-digit pin code is displayed in the wire-
less WPS menu.
Note:
7
Refer to the manual of your router to find
out how the PIN is entered via a PC.
10 Use a PC to enter the pin on the router (e.g.
AVM FRITZ!Box: menu item WLAN Set-
tings... WPS) and save.
Note:
7
The 8-digit PIN code must be entered in the
modem interface in 2 minutes; otherwise,
connection of television with the modem is
cut.
11 Press »
yy
« (green) to confirm the registra-
tion.
– The message “Connection to Gateway:
Success” appears.
12 Press »
yy
« (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Successfull«, »Internet Connection: Suc-
cessfull« messages and MAC address will
be displayed.
13 Press » EXIT « to end the setting.
Connecting automatically by entering
the network password
Use this method for establishing a connection
if your router does not support “WPS-PBC” or
WPS PIN entry.
1 Open the menu with » MENU «.
2
Select menu item »Settings« with » V «, » Λ «,
»
<
« or »
>
« and press »
OK
« to confirm.
3 Select the menu item »Network« with »
>
« or
»
<
« and press »
V
« to confirm.
– »Network« menu is active.
Change Connection Type Wired
Network Configuration AUTO
Wake-on-LAN Off
Advanced
Picture
Tuesday
xx xxx xxxx
Source Timer Sound Network TV Parental
Settings > Network
Change Area Connec Test Connection Select Back
BACK
4 Select the line »Change Connection Type«
with »
V
« or »
Λ
« and press » OK « to
confirm.
5 Select the option »Wireless« with »
V
« or
»
Λ
« and press » OK « to confirm.
– WiFi warning message will be displayed.
6
Confirm the message »Do you want to turn
on Wi-Fi?« select »Yes« with »
<
« or »
>
« and
press » OK « to confirm.
7 Select the line »Network Configuration«
with »
V « or » Λ « and select the option
»AUTO« with »
<
« or »
>
«.
8 Select the line »Select Access Point« with
»
V
« or »
Λ
« and press » OK « to confirm.
– »Select Access Point« menu is displayed
by scanning available wireless networks.
9 Select the network that you want to con-
nect with »
V
« or »
Λ
« and press » OK « to
confirm.
– Wireless connection password screen is
displayed.
NETWORK SETUP
-------------------------------------------------------------------------------------------
ENGLISH 90
NETWORK SETUP
-------------------------------------------------------------------------------------------
Technical requirements
Most of the home networks are Dynamic. If
you have a dynamic network, you must use a
DSL modem that supports DHCP. Modems and
IP sharers that support DHCP obtain the »IP
Address«, »Netmask«, »Gateway« and »DNS«
values required for internet access automatical-
ly, and thus you are not required to enter those
values manually.
Wireless WPS network connection
through by pressing a button
1 Open the menu with » MENU «.
2
Select menu item »Settings« with » V «, » Λ «,
»
<
« or »
>
« and press » OK « to confirm.
3 Select the menu item »Network« with »
>
« or
»
<
« and press »
V
« to confirm.
– »Network« menu is active.
4 Select the line »Change Connection Type«
with »
V
« or »
Λ
« and press » OK « to
confirm.
5
Select the option »Wireless WPS« with » V «
or »
Λ
« and press » OK « to confirm.
– WiFi warning message will be displayed.
6
Confirm the message »Do you want to turn
on Wi-Fi?« select »Yes« with »
<
« or »
>
« and
press » OK « to confirm.
7 Select the line »WPS Type« with »
V
« or
» Λ « and select the option »Push Button«
with »
<
« or »
>
«.
Çhange Connection Type Wireless WPS
WiFi On
WPS Type Push Button
Select Access Point N/A
Network Configuration Auto
Wake-on-LAN Off
Picture
Tuesday
xx xxx xxxx
Source Timer Sound Network TV Parental
Settings > Network
Change Area Connect Test Connection Input Mode Exit Back
EXIT BACK
8 With »
y
« (red) select »Connect« to establish
modem connection.
– »Push the WPS button on your Access
Point« message is displayed.
9 Press the WPS button on the router.
10 To continue after pressing the WPS button
on the access point, select the option »Con-
tinue« with »
<
« or »
>
«and press » OK « to
confirm.
– The “Connection to Gateway: Success”
message will be displayed.
11 Press »
yy
« (green) to make sure that the
network connection is established with the
current settings.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
12 Press » EXIT « to end the setting.
Wireless WPS network connection with
PIN
1 Open the menu with » MENU «.
2
Select menu item »Settings« with » V «, » Λ «,
»
<
« or »
>
« and press » OK « to confirm.
3 Select the menu item »Network« with »
>
« or
»
<
« and press »
V
« to confirm.
– »Network« menu is active.
4 Select the line »Change Connection Type«
with »
V
« or »
Λ
« and press » OK « to
confirm.
5
Select the option »Wireless WPS« with »
<
«
or »
>
« and press » OK « to confirm.
– WiFi warning screen will be displayed.
6
Confirm the message »Do you want to turn
on Wi-Fi?« select »Yes« with »
<
« or »
>
« and
press » OK « to confirm.
7 Select the line »WPS Type« with »
V
« or
» Λ « and select the option »PIN« with »
<
«
or »
>
«.
Çhange Connection Type Wireless WPS
WiFi On
WPS Type PIN
Select Access Point N/A
Network Configuration Auto
Wake-on-LAN Off
Picture
Tuesday
xx xxx xxxx
Source Timer Sound Network TV Parental
Settings > Network
Exit Back EXIT BACK
Change Area Change Mode
Chassis J5
GR
UNDIG Ser
vice
1 - 43
Chassis G5
GR
UNDIG Ser
vice
1 - 43