Grundig GWN 48430 CW, Руководство пользователя

Страница: 39 / 48

39 / EN
Washing Machine / User‘s Manual
Maintenance and cleaning
A
WARNING:
Never use sponge
or scrub materials. These will damage
the painted, chrome plated and plastic
surfaces.
7.3 Cleaning the body
and control panel
Wipe the body of the machine with soapy
water or non-corrosive mild gel detergents as
necessary, and dry with a soft cloth.
Use only a soft and damp cloth to clean the
control panel.
7.4 Cleaning the water
intake filters
There is a filter at the end of each water intake
valve at the rear of the machine and also at
the end of each water intake hose where they
are connected to the tap. These filters prevent
foreign substances and dirt in the water to
enter the washing machine. Filters should be
cleaned as they do get dirty.
ƒ
1 Close the taps.
ƒ
2 Remove the nuts of the water intake hoses
to access the filters on the water intake
valves. Clean them with an appropriate
brush. If the filters are too dirty, take them
out by means of pliers and clean them.
ƒ
3 Take out the filters on the flat ends of
the water intake hoses together with
the gaskets and clean thoroughly under
running water.
ƒ 4 Replace the gaskets and filters carefully in
their places and tighten the hose nuts by
hand.
7.5 Draining remaining water
and cleaning the pump filter
The filter system in your machine prevents solid
items such as buttons, coins and fabric fibers
clogging the pump impeller during discharge
of washing water. Thus, the water will be
discharged without any problem and the
service life of the pump will extend.
If the machine fails to drain water, the pump
filter is clogged. Filter must be cleaned
whenever it is clogged or in every 3 months.
Water must be drained off first to clean the
pump filter.
In addition, prior to transporting the machine
(e.g., when moving to another house) and in
case of freezing of the water, water may have
to be drained completely.
A
WARNING:
Foreign substances
left in the pump filter may damage your
machine or may cause noise problem.
A
WARNING:
If the product is not in
use, turn the tap off, detach the supply
hose and drain the water inside the
machine against any freezing possibility
in the region of installation.
A
WARNING:
After each use close
the supply hose tap of the product.
In order to clean the dirty filter and discharge
the water:
ƒ 1 Unplug the machine to cut off the supply
power.