15 / EN
Washing Machine / User‘s Manual
Installation
3.6 Adjusting the feet
A
WARNING:
In order to ensure
that the product operates more silently
and vibration-free, it must stand level
and balanced on its feet. Balance the
machine by adjusting the feet. Otherwise,
the product may move from its place and
cause crushing and vibration problems.
1
. Loosen the lock nuts on the feet by hand.
2
. Adjust the feet until the product stands
level and balanced.
3
. Tighten all lock nuts again by hand.
A
WARNING:
Do not use any tools
to loosen the lock nuts. Otherwise, they
will get damaged.
3.7 Electrical connection
Connect the product to a grounded outlet
protected by a 13 A fuse. Our company shall
not be liable for any damages that will arise
when the product is used without grounding in
accordance with the local regulations.
•
Connection must comply with national
regulations.
•
Power cable plug must be within easy
reach after installation.
•
If the current value of the fuse or breaker
in the house is less than 13 Amps, have a
qualified electrician install a 13 Amp fuse.
•
The voltage specified in the "Technical
specifications" section must be equal to
your mains voltage.
•
Do not make connections via extension
cables or multi-plugs.
B
WARNING:
Damaged power
cables must be replaced by the
Authorized Service Agents.
Electrical requirements
Before you insert the plug into the wall socket
make sure that the voltage and the frequency
shown in the rating label corresponds to your
electricity supply.
We recommend that this appliance be
connected to the mains supply via a suitable
switched and fused socket in a readily
accessible position.
Should the mains lead of the appliance
become damaged or need replacing at any
time, it must be replaced by a special purpose
made mains lead which can only be obtained
from a Authorised Service Agent.
B
WARNING:
This appliance must be
earthed
If the fitted moulded plug is not suitable for
your socket, then the plug should be cut off
and an appropriate plug fitted.
Destroy the old plug, which is cut off as a
plug with a bared cord could cause a shock
hazard if inserted into a socket elsewhere in
the house.
