41
Dryer / User Manual
1.5 Installing safety
• To prepare the product ready for installation, ensure that the electrical
installation and water drain is proper by checking the information in the
user manual. If it is not suitable for installation, call a qualified electrician
and plumber to arrange the utilities as necessary. These operations shall be
undertaken by the customer.
• Check for any damage on the product before installing it. Do not have the
product installed if it is damaged.
• Do not remove the adjustable stand.
• Place the product on a level and hard surface and balance with the adjustable
legs.
• The gap between the product and the floor shall not be reduced via materials
such as rugs, pieces of wood and bands. The ventilation holes under the base
of the product shall not be clogged with a rug.
• The product shall be installed not to clog the ventilation holes.
• Install the product in an environment free of dust with good ventilation.
• Do not install the product in close proximity to flammable and explosive
materials and do not keep flammable and explosive materials near the product
when it is in operation.
• The product shall not be installed against a door, sliding door where the
product loading door cannot be completely opened, or behind a hinged door
where the product hinge is faced against the door’s hinges.
• Install the product where periodic maintenance and cleaning can be done with
ease.
• Place the product with its back surface to the wall (for heater models).
• After placing the product, ensure that the back wall does not come in contact
with any extrusion (a water tap, electrical outlet etc.).
• Place the product with at least 1 cm space between the product and the
furniture edges.
• Follow the flue connection rules specified in the guide (for models with flue).
• The exhaust air shall not be directed to flue which is used to exhaust the
smoke of devices that consume gas or other fuels (for models with flue).
• The ventilation hose shall not be connected to a heating stove or a chimney
flue (for models with flue).
• Plug the product to a grounded outlet protected with an appropriate fuse in
align with the specified type and current rates. Have an expert electrician set
grounding equipment. Do not use the product without a grounding conforming
with regional/national regulations.
• Plug the product in a grounded socket that conforms with the voltage, current
and frequency values specified in the type label.
Содержание GT77823WHF12
Страница 1: ...Trockner Bedienungsanleitung Dryer User Manual GT77823WHF12 DE EN 2960313065_DE 150222 1809 ...
Страница 67: ......
Страница 68: ......