Web Browser :
Microsoft Internet Explorer 6.0 or later
Firefox
Chrome
Safari
Network Card :
10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation
Viewer :
ActiveX control plug-in for Microsoft IE
4.4. Power Connection
Make sure the camera’s power cable is correctly and firmly connected, please refer to the pin definition table in
section 4.1. Camera’s Connectors. If using Power over Ethernet (PoE), make sure the Power Sourcing Equipment
(PSE) is in use in the network.
4.5. Ethernet Cable Connection
Use of Category 5 Ethernet cable is recommended for network connection. To have the best transmission quality,
the cable length shall not exceed 100 meters. Connect one end of the Ethernet cable to the RJ45 connector of the
IP Camera, and the other end of the cable to the network switch or PC.
NOTE: In some cases, you may need to use an Ethernet crossover cable when connecting the IP Camera directly
to the PC.
Check the status of the link indicator and the activity indicator LEDs. If the LEDs are unlit, please check the LAN
connection.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.
5. Accessing the Camera
For initial access to the IP Camera, users can search the camera through the installer program: GRUNDIG
Finder.exe, which can be found on the supplied CD.
GRUNDIG Finder Software Setup :
Step 1: Double-click on the program GRUNDIG Finder.exe (see the desktop icon below). Its window will appear as
shown below. Then click on the “Find Device” button.
5
English
