File Name :
The uploaded image’s filename format can be set in this section. Please select the one that meets your
requirements (please see the section "File Name" in 9.8.1. 'Application (Alarm Settings)').
Save :
After completing all the settings mentioned above, please click on the Save button to save all the settings in this
page.
9.8.6. Manual trigger
In the Manual Trigger setting, the current image(s) or video(s) can be upload to the appointed destination, such as
an FTP site or an E-mail address. The administrator can specify the triggered actions that will take place when
the users switch the Manual Trigger button to <On>. All options are listed as follows.
Manual Trigger :
The default setting for the Manual Trigger function is <Off>. Enable the function by selecting <On>. After the
Manual Trigger function is enabled, click on the Manual Trigger button on the Home page to start uploading data.
Click again to stop uploading.
Triggered Action (Multi-option) :
The administrator can specify alarm actions that will take place at alarm occurrence. All options are listed as
follows.
- Enable Alarm Output:
Select this item to enable the alarm relay outputs.
- IR Cut Filter:
Select the item and the IR cut filter (ICR) of the camera will be removed (on) or blocked (off) when an alarm is
triggered.
Note: The IR Function (Please refer to the section "IR Function") cannot be set as <Auto> mode if this trigger
action is enabled.
- Send Message by FTP:
The Administrator can choose to send an alarm message by FTP when an alarm is detected.
52
English
