background image

28

28

Cleaning the tape drive

To guarantee good recording and playback quality, clean the parts shown
(1, 2, 3) after every 50 hours of use, or once a month.
Open the tape compartment, moisten a cotton swab with alcohol or a speci-
al head-cleaning fluid and clean the idler (3), the capstan (2) and the
magnetic heads (1). Close the cassette compartment. You can also play a
cleaning cassette to clean the magnetic heads (1).
Protect your cassettes from humidity, dust, heat and cold.
Do not store your tapes near devices with strong magnetic fields such as tele-
visions and loudpeakers.
After using a cassette, put it back in its protective case.

Technical data

This device is noise-suppressed according to the applicable EU directives.
This product fulfils the European directives 89/336/EEC, 73/23/EEC and
93/68/EEC.
This device conforms to the safety regulation DIN EN 60065 (VDE 0860) and
therefore the international safety regulation IEC 60065.
Never open the device casing. The manufacturer will not accept any liability
for damage resulting from improper handling.
The type plate is located on the bottom of the device.

INFORMATION

_____________________________________

Technical and design modifications reserved

Power supply

Mains operation: ......... 230 V, 50/60Hz
Max. power consumption: Approx. 20 W

..................(operation), <1 W (stand-by)

Battery operation: .................6 x 1.5 Volt
..........................(IEC/LR20/AM1/D size)

Output:

DIN 45324, 10% THD
Music signal power:  ........ 2 x 5000 mW
Sine wave power: ............ 2 x 3000 mW
Stereo headphone jack 3.5 mm ø

Radio 
frequency bands

FM 87.5 ... 108.0 MHz
MW 526.5 ... 1606.5 kHz
LW 148.5 ... 283.5 kHz

CD unit

Frequency response:  .... 20 Hz ... 20 kHz
Noise voltage ratio:  ..................

65 dB

Cassette unit

Sound recording 
medium: ......................Compact cassette 

according to DIN 45516 

Track position:  International quarter-track
Tape speed: ...................... 4.76 cm/sec.
Motor: ................................... DC motor
Frequency range:  ...... 125 Hz ... 10 kHz
Noise voltage ratio:  ..................

42 dB

Band speed fluctuation:  ...........

0.35 %

Dimensions and weight

W x H x D  .........444 x 184.5 x 253 mm 
Weight .......................................3.7 kg

5

3

2

1

4

3

2

1

Содержание Freaxx RRCD 4202



















Отзывы: