Grundig 40 VLE 812 S, Руководство пользователя

Страница: 15 / 82

­15
ENGLISH
tuning­the­television­channels­
from­satellite­(DvB-s)
You have two options for tuning digital satellite
channels.
A
The easy installation,
which pre-configures all antenna settings for
the satellite channels on Astra 19.2° East.
B The advanced installation
can be used if you wish to receive satellite
channels from various satellites. To do so,
you must make the antenna settings (Satel-
lite, LNB Power, LNB Type, DISEqC Mode,
LNB Selection) for the satellites chosen.
easy­installation
1
In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Satellite«
with »
<
« or »
>
«.
2 Select the line »Easy Installation« with »
v
«
or »
Λ
« and press » oK « to confirm.
– Other menu options will be displayed,
the satellite Astra 19.2° East is preset.
3
Start the scan with »

« (green).
– The »Search results« menu appears, and
the scan for TV channels begins.
– Depending on the number of television
channels received, this can easily take a
few minutes.
– The scan is complete as soon as the »PRO-
GRAM TABLE« appears.
note:
7
You can abort the scan by pressing
» menu «.
Advanced­installation
1 In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Satellite«
with »
<
« or »
>
«.
2
Select the line »Advanced Installation« with
»
v
« or »
Λ
« and press »
oK
« to confirm.
– The menu appears.
Satellite ASTRA 2A°,E
Transponder 10714
LNB Type Universal
DISEqC Mode Off
LNB Power Off
LNB Selection Off
Auto Tuning
Quality
Signal strength
Low Normal Good
Exit
Back
INSTALLATION
ANTENNA SETTINGS
Manual Tuning
20.07.2011
15:46
3
Select the line »Satellite« with »
v
« or »
Λ
«
and press »
oK
« to confirm.
– The »SELECT SATELLITE« menu appears.
Select the satellites with »
v
«, »
Λ
«, »
<
« or
»
>
« and press »
oK
« to confirm.
note:
7
The setting in the line »Transponder« is not
required for this automatic scan.
4 Select the line »LNB Power« with »
v
« or
»
Λ
«.
Depending on the type of LNB, set the LNB
power supply to »13/18 V« or »14/19 V«
with »
<
« or »
>
«.
5 Select the line »LNB Type« with »
v
« or »
Λ
«.
Select the type of LNB installed with »
<
«
or »
>
«.
settinGs
­-----------------------------------------------------------------------------------------------------------------------------------------