Grundig 32 GFB 6621, Инструкция пользователя

Страница: 91 / 108

91­ ENGLISH
7
If »

« (red) is pressed, the saved channels
will be deleted from the current channel list.
– The »Digital Searching« menu appears,
and the scan for TV channels begins.
– The search is complete as soon as the
message »Search is completed!« appears.
Note:
7
The search can be aborted with »
EXIT
«.
11­ Switch to the Channel Editor with »

«
(yellow) ;
or
press »
EXIT
« to end the setting.
SETTING­FURTHER­CHANNELS
­-----------------------------------------------------
Searching­for­digital­terrestrial­
TV­channels­manually
1­
Open the menu with »
MENU
«.
2­ Select menu item »Settings« with »
V
«, »
Λ
«,
»
<
« or »
>
« and press » OK « to confirm.
3­
Select the menu item »Source« with »
>
« or
»
<
« and press »
V
« to confirm.
– »Source« menu is active.
4­ Select the line »Advanced« with »
V
« or
»
Λ
« and press » OK « to confirm.
5­ Select the line »Active Antenna Power« with
»
V
« or »
Λ
«.
Switch on the antenna power supply for the
antenna with »
<
« or »
>
« (»On«)
Important:
7
The antenna power supply (5V ) may only
be switched on if the antenna is an active
indoor antenna with a signal amplifier and
it is not already supplied with a voltage via
a mains plug (or similar supply). Otherwise
you may cause a short circuit and irrepara-
bly damage your antenna.
6­ Press » BACK
<
« to go back one menu
level.
7­
Select the line »Manual Channel Search«
with »
Λ
« or »
V
« and press »
OK
« to
confirm.
8­ Select the option »Air« with »
Λ
« or »
V
«
and press » OK « to confirm
– »Manual Channel Search« menu is dis-
played.
9­ Select whether to search for digital or ana-
logue TV channels.
To to this press »
Λ
« or »
V
« to select the
option »Digital« or »Analogue« and confirm
with » OK «.
10­
Enter frequency (3-digit) directly with
»
1...0
«.
– Search will start.
– The search is finished when the channels
found appear in the list.
11­ Press » EXIT « to end the setting.