Grundig 32 GFB 6621, Инструкция пользователя

Страница: 54 / 108

ENGLISH 54­
ADVANCED­SETTINGS
­------------------------------------------------------------------------------
1­ Open menu with » MENU « button.
2­
Select menu item »Settings« with »
V
«, »
Λ
«,
»
<
« or »
>
« and press »
OK
« to confirm.
3­ Select menu item »TV« with »
<
« or »
>
« and
press »
V
« to confirm.
– »TV« menu is active.
4­ Select the line »Advanced« with »
V
« or
»
Λ
« and press » OK « to confirm.
Auto Sleep 4 Hours
Show Logo Display No
Power LED Backlight Medium
Power Saving Mode Off
Permanent Timeshift Off
Picture
Tuesday
xx xxx xxxx
Source Timer Sound Network TV Parental
Settings > TV > Advanced
Change Area Exit Back
BACK EXIT
Change Mode
Note:
7
Additional operations are explained in the
following sections.
Auto­sleep
This function will turn the television to stand-by
mode in 4 hours depending on your setup, un-
less the television receives any signal, or keys or,
according to European regulations, the remote
remains untouched for 5 minutes.
1­ From the »Advanced« menu use »
V
« or
»
Λ
« to select the line »Auto Sleep«.
2­
Select the switch-off time with »
<
« or »
>
«.
Note:
7
Set the function to »Off« with »
<
« or »
>
« to
switch off.
3­
Press »
BACK
<
« to go back one menu
level or press »
EXIT
« to end the setting.
Store­logo­view­
This function is intended for feature introduction
at stores. When »On« is selected, feature logos
are displayed.
1­ From the »Advanced« menu use »
V
« or
»
Λ
« to select the line »Shop Logo Display«.
2­ Select »Yes« with »
<
« or »
>
«.
Note:
7
Set the function to »No« with »
<
« or »
>
« to
switch off.
3­ Press » BACK
<
« to go back one menu
level or press » EXIT « to end the setting.
Power­LED­brightness­
You can adjust power (stand-by) LED brightness
in operation mode of television.
1­
From the »Advanced« menu use »
V
« or
»
Λ
« to select the line »Power LED Bright-
ness«.
2­ Use »
<
« or »
>
« to set the brightness to
»High«, »Medium« or »Low«.
3­ Press » BACK
<
« to go back one menu
level or press » EXIT « to end the setting.