Grundfos Oxiperm OCD-164, Инструкция по установке и эксплуатации

Страница: 23 / 528

English (GB)
23
6.8.4 Code function
2 different code functions can be selected:
• Level 1: Operators
Authorisation for the menus "Automatic, "Manual operation",
"Logbook" and "local/remote".
• Level 2: Parameters
unlimited privileges
• In the "Basic setting" menu, scroll to page 2 using the
[ARROW RIGHT] key.
• Switch to "Code function" menu using the [F1] key.
Switch to operator selection using [F1] key.
• Activate the input field using [F1] key.
• Enter code (max. 4 digits) using the arrow keys [RIGHT],
[LEFT], (UP], and [DOWN].
• Confirm using [Enter] key.
• Use the [Enter] or [Escape] key to return to the "Code
function" menu.
Switch to "Level 2 Parameters" using [F2] key.
• Activate the input field using [F1] key.
• Enter code as described for "Level 1".
• Use the [Enter] or [Escape] key to return to the "Code
function" menu.
• Use [Escape] key again to return to "Basic setting" menu.
6.8.5 Reset function
In the "Basic setting" menu, select the reset function using the
[F2] key, or scroll in the "Basic setting" menu.
• Switch to the input field using the [F1] key, enter new code
using the arrow keys [RIGHT], [LEFT], [UP], and [DOWN],
enter code.
Reset code: 6742
• Confirm using [Enter] key.
• Use the [Enter] or [Escape] key to return to the "Basic setting"
menu.
6.8.6 Date/time
In the "Basic setting" menu, select the "Date/time" menu using
the [F3] key.
Time
• Switch to the "Time" menu using the [F1] key.
Use the [F1] key to activate the input fields for hours (XX),
minutes (YY) and seconds (ZZ) (input field flashing). Switch from
hours to minutes or seconds by pressing the [F1] key again.
• Use the [Escape] key to deactivate the input field.
Setting the time
Following activation of the respective input field using the [F1]
key, set the new value using the arrow keys [RIGHT], [LEFT],
[UP], and [DOWN].
• Confirm the new value in each case using the [Enter] key
(input field no longer flashes).
Once all values have been set and confirmed using the [Enter]
key, press the [F2] key (accept) to update the new time.
• Return to the "time setting" menu with the [escape] key,
by pressing the [escape] key once again return to the "setup"
menu.
Setting the date/day of week
• Switch to the "Date setting" menu using the [F2] key.
• Switch to the "Day of week" menu using the arrow [RIGHT]
key, and back to the "Date setting" menu using the arrow
[LEFT] key.
The setting is made analogous to the time setting, i.e. activate
input fields using the [F1] key, set new value using the arrow keys
[RIGHT], [LEFT], (UP], and [DOWN], and confirm with [Enter].
The new value is updated by pressing the [F2] key (accept).
• Use the [Escape] key to return to the "Time setting" menu.
Daylight saving time
• Switch to the "Daylight saving time" menu using the [F3] key.
• Activate the input field using the [F1] key (input field flashing).
Various settings can be selected using the [UP] and [DOWN]
arrow keys.
Settings
• Confirm the settings using the [Enter] key.
• Use the [Escape] key to return to the "Time setting" menu.
Note
Level 1 and 2 are set to "0" each. This means
unlimited privileges without password scanning.
Note
The entered codes are reset by entering the number
"1998". Then both levels are reset to "0".
Code function
1 Level 1
2 Level 2
Level 1 operator
Code: 0
Reset function
Code: xxxx
Input password
Time setting
1 Time
2 Date
3 Daylight sav.
Time setting
New
Current
XX:YY:ZZ 17.07.02
2 Accept
Date setting
New
Current
XX.YY.ZZ 15.05.02
2 Accept
Day of week
New
Current
XX.YY.ZZ 15.05.02
XX Monday
2 Accept
Daylight saving time off
Switch <off>
>
ON Direct switching to daylight saving time
MANUAL Manual entering of daylight saving time
EU
Pre-setting of daylight saving time for EU
countries