English (GB)
23
10.3.18 Set current input 2 (disturbance variable/
command variable)
Selecting signal
•
Select code function 13:
– OFF: Signal 0 to 20 mA.
– ON: Signal 4 to 20 mA.
•
Assign current input 2 to range 0-100 %.
– Switch off code function 24: 0 (4) mA
corresponds to 0 % and 20 mA corresponds to
100 %.
Assigning current output 2 to a freely selectable
range
•
Switch on code functions 14, 24 and 15.
– A colon flashes in the display.
Fig. 28
Setting current input 1
•
Switch off code function 15.
10.3.19 Setting current output 1 (control output
for SP 1)
Selecting signal
•
Select code function 19:
– OFF: Signal 0 to 20 mA.
– ON: Signal 4 to 20 mA.
10.3.20 Setting current output 2
Selecting function of current output 2
•
Select code function 21:
– OFF: Position of feedback potentiometer.
– ON: Control output for switching point 2.
Selecting signal
•
Select code function 20:
– OFF: Signal 0 to 20 mA.
– ON: Signal 4 to 20 mA.
10.3.21 Settings for the feedback potentiometer
Reading current positioning angle
Fig. 29
Reading the position angle
Adjusting feedback potentiometer
•
Switch on code function 15.
– A colon flashes in the display.
•
Close the servomotor completely using the
"Down" button.
Fig. 30
Closing servomotor
TM
03
70
84
12
13
1:5.0
%
0:21
n+1
-
+
n+1
0:00
%
M2
X:XX
%
M2
-
-
+
Y:YY
%
M2
+
Set start-of-scale
setpoint
(correlates with
0 (4) mA).
Save start-of-scale
setpoint.
Save full-scale
setpoint.
Set full-scale
setpoint
(correlates with
20 mA).
T
M
03
70
85
12
13
TM
03
70
86
12
13
XX.X
%
The positioning angle is displayed
0:04
%
-
0:00
%
Lower setpoint is set to 0 %.
